
Dryer Repair Guide
1. Dryer Not Starting
Possible Causes:
-
Power cord not plugged in or outlet has no power.
-
Circuit breaker/fuse tripped.
-
Door not fully closed.
-
Start button defective.
Solutions:
-
Check the outlet and power cord.
-
Reset the circuit breaker or replace the fuse.
-
Ensure the door is shut properly.
-
Test the start switch.
2. Dryer Runs But Doesn’t Heat
Possible Causes:
-
Heating element (heater) faulty.
-
Thermostat or thermal fuse blown.
-
Lint filter clogged.
-
Vent hose blocked.
Solutions:
-
Clean lint filter and vent hose.
-
Call a technician for thermostat or heating element replacement.
3. Dryer Overheating
Possible Causes:
-
Lint filter blocked.
-
Condenser unit or vent clogged.
-
Faulty thermostat.
Solutions:
-
Clean the lint filter.
-
Check and clean vent and air ducts.
-
Replace thermostat if defective (service required).
4. Dryer Making Excessive Noise
Possible Causes:
-
Dryer not level on the floor.
-
Drum bearings or rollers worn out.
-
Foreign objects inside the drum (coins, buttons, etc.).
Solutions:
-
Level the dryer.
-
Inspect the drum for objects.
-
Replace bearings/rollers if needed (technician required).
5. Drum Not Turning
Possible Causes:
-
Drive belt broken or loose.
-
Motor failure.
-
Drum jammed.
Solutions:
-
Check and replace the belt if necessary.
-
Try rotating the drum manually.
-
If motor is defective, call for service.
6. Clothes Not Drying / Still Damp
Possible Causes:
-
Dirty lint filter.
-
Vent hose blocked.
-
Condenser tank full.
-
Heating element malfunction.
Solutions:
-
Clean the filters.
-
Empty the condenser water tank.
-
Inspect the vent hose.
-
Call service if heating element is faulty.
?? Note: Repairs involving electricity, heating elements, or the motor can be dangerous. For safety, always contact an authorized service technician.
Repairs involving electricity, heating elements, or the motor can be dangerous. For safety, always contact an authorized service technician.
Image related to the article
